Top 10 Best Car Sound Dampening Material
1
- Lightweight, Waterproof: It is a waterproof light-weight thermal deadener with highly compressible closed cell foam formulation, it absolutely doesn’t absorb moisture and has no odor, and it’s flexible which make it easy to install with or without roller.
- Closed Cell Foam: OIL and Waterproof LINER closed-cell polyethylene foam is the best for car, Siless with an adhesive layer 100% ensures optimum efficiency and thermal insulation that could be possibly gained. The price of 1 sqft of Siless Liner with similar characteristics is more then three times cheaper! Excellent quality for less money!!
- The operating temperature of the material is the same as of the rubber foam up to 215 degrees Fahrenheit.
- Heat Blocker and Sound Deadener: Effectively blocks 98% of radiant heat transfer. Siless Liner is a very versatile insulation material with excellent thermal barrier properties that will block engine, exhaust, & summer heat, ensure your vehicle stays cooler in the summer and warmer in the winter, making your ride more pleasant!
- SILESS Liner specifications: Self-adhesive foam rolls (closed cell PE foam) with waterproof glue. Thickness 157 mil / 0.157 inches / 4mm. Number of rolls in the package – 1. Total coverage area – 36 ft². Each roll size – 15.74 x 330.7 inches.
- Value for money4.6
- Easy to install4.4
- Adhesion4.2
- Noise level4
- Noise cancellation3.8
2
uxcell 394mil 10mm 16.36sqft Car Block Heat Sound Absorption Deadener Insulation Mat 60″x40″
Price starts from: $33.99
- Placement of using sound deadener mat:A.Hood B.Celling C.Door D.Cockpit Floor E.Tailgate F.Firwall and U Type Wall J.Front fen-der H.Front and Back Wheels
- Perfect for Automobiles, Condos, Apartments, Studios, Classrooms, Factory and more.
- 1.Waterproof and moistureproof 2.Superb backed self adhesive 3.Easy to install/handle/cut flexible
- Liner has the same characteristics and excellent noise insulator properties as rubber foam. It absolutely doesn’t absorb water & has no unlike polyurethane foam. It has a very low weight, oil and petrol resistant.
- The material used is an excellent insulator! The sound deadener material allows you to deal with both, cold and the heat. This is especially important in hot climate areas. Well-insulated interior is a pledge of high comfort while in vehicle. Liner heat shield material will solve the problem of excessive heating if your car is equipped with a powerful engine and enhanced exhaust system. It is also easy to use Liner as the hood insulation (hoodliner).
- Value for money4.7
- Easy to install4.6
- Noise cancellation4.5
- Durability4.5
- Heat resistance4.3
- Adhesion4.2
3
- Sound deadening material specifications: Nominal thickness 50 mil; Total coverage area of 50 sq.feet; Number of sheets in the stack 47; Nominal sheet Size 9.8×15.7 inch. Roller is not included.
- Now everyone can easily eliminate the annoying road noise in the vehicle. We’ve designed the product that pretty efficiently handles the rattle and reduces noise while being affordable to almost everyone. KILMAT would deaden the entire car for the same money that would be enough to only insulate the doors using the expensive brands material.
- Car insulation KILMAT has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you’ll be 100% sure that the soundproofing is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- Automotive self-adhesive insulation consists of butyl. KILMAT sound deadening has a total weight of 0.35 lbs/1sqft. This weight ensures optimum efficiency and sound insulation that could be possibly gained from 50 mil thickness material. KILMAT 50 mil is light weighted sound deadening material!
- The cost effective 50 mil automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
- Adhesion4.8
- Easy to install4.8
- Easy to use4.8
- Value for money4.7
- Noise level4.6
- Noise cancellation4.6
4
uxcell 236mil 16.36sqft Car Auto Truck Sound Deadener Heat Insulation Underlay Shield Mat 60″x40″
Price starts from: $27.99
- Strong sound insulation and absorption performance,heat insulation, damping and
- You can also use on car roof floors, hood , firewall, chassis, trunk room, trunk lid and so on.. Do not cover the chassis wiring or air holes.
- Slow down the car paint ageing.Because of hot weather, the front outer cover through the direct sun, high temperature inside and outside the engine, accelerated paint aging
- The surface high-fiber cloth is fiberglass. Heatproof .Block transmit sunlight, engine, exhaust pipe heat to the cab, reduce air conditioning energy consumption, saving fuel
- Keeps Heat In-Cold Out in the Winter, Keeps Cold in-Heat Out in the Summer.In the winter, the engine temperature is very high, but outside is very low when driving, which make car parts damaged easier
- Heat resistance4.5
- Easy to install4.4
- Adhesion4.3
- Noise cancellation4.2
5
- ★ Advanced Formulation – SILESS VIBRO Damping Material consists of newly invented Bmastic, technologically most advanced and efficient sound deadening composition on the market today.
- ★ SILESS VIBRO specs — Thickness 80 mil/ 0.08 inches/ 2mm, Coverage area – 72 ft², Number of Boxes – 2, Number of sheets in each box – 14, Each sheet size – 23.6 x 15.94 inches. The installation instructions are included in the package, but a roller isn’t. PLEASE NOTE: Siless Branded logo on the front is optional, some batches could have it and some not. As per USPS Priority mail weight restrictions per box, all boxes in the multi pack will be shipped separately.
- ★ Ease of Installation — SILESS VIBRO Damping Material is easy to install with a “peel and place” application. Simply trim the pieces to fit, peel and place and hand roll to ensure good adhesion. No messy spray-on paints or adhesives are needed to install this product.
- ★ Value – SILESS VIBRO Damping Material is just under $1.53 per sqft, priced to be cost effective, when compared to similar products on the market. Car soundproofing does not have to be expensive to work!!
- ★ Siless VIBRO 80 mil is ultimate quality sound deadening insulation. Designed for the automotive industry as an industrial sound damping material for applications that need extreme performance, it is well suited to the demanding car enthusiast as well.
6
- Applications: Exterior bulkhead, firewall, hood, engine compartment, engine bays. boot, wheel arch, body panels, load floor, under the seat, floor, interior bulkhead. Also ideal for underfloor applications as it has great load resistance properties
- Strong sound deadener, sound insulation and absorption performance, heat insulation, damping and antisepsis
- Scratch-resistant. The surface high-fiber cloth is fiberglass. Heatproof. Block transmit sunlight, engine, exhaust pipe heat to the cab, reduce air conditioning energy consumption, saving fuel
- 100% Brand New heat shield Car Sound Deadener, PE with aluminum material, Thickness: 6mm, High-quality tri-layer, twin density lightweight foam laminate
- The fireproofing grade with the mat is B2 and its distortion temperature is 200¡æ. High-temperature resistance Easy to cut & fit, strong adhesive backing, High-Quality foam rubber with Aluminum sheet 1100£¨AA£:0.1mm thickness pure aluminum / Smooth Function: Soundproof Stick: Best Self-adhesive Type: Car Deadening Material: Insulating alumina fiber &Sound insulation cotton
- Easy to install5
- Adhesion4.2
- Value for money4.2
- Noise cancellation3.9
- Noise level3.7
7
- 100% Brand New heat shield Car Sound Deadener, PE with aluminum material, Thickness: 10mm, High quality tri-layer, twin density lightweight foam laminate
- The fire proofing grade with the mat is B2 and its distortion temperature is 200¡æ.High temperature resistance Easy to cut & fit, strong adhesive backing,High Quality foam rubber with Aluminum sheet 1100£¨AA£:0.1mm thickness pure aluminum / Smooth Function:Soundproof Stick:Best Self-adhesive Type:Car Deadening Material: Insulating alumina fiber &Sound insulation cotton
- Applications: Exterior bulkhead, firewall, hood, engine compartment, engine bays. boot, wheel arch, body panels, load floor, under seat, floor, interior bulkhead. Also ideal for under floor applications as it has great load resistance properties
- Strong sound deadener,sound insulation and absorption performance,heat insulation, damping and antisepsis
- Scratch resistant. The surface high-fiber cloth is fiberglass. Heatproof.Block transmit sunlight, engine, exhaust pipe heat to the cab, reduce air conditioning energy consumption, saving fuel
- Noise level4.7
- Noise cancellation4.6
- Heat resistance4.5
- Adhesion4.3
- Easy to use4.3
- Easy to install4.3
8
- Automotive self-adhesive insulation consists of butyl. Noico sound deadening has a total weight of 0.7 lbs / 1 sqft (3.7kg / 1 sqm). This weight ensures maximum efficiency and sound insulation that could be possibly gained from 80 mil (2 mm) thickness material. Noico Black 80 mil (2 mm) is full weighted sound deadening material!
- Audio insulation Noico has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you’ll be 100% sure that the insulation is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- The cost effective 80 mil automotive butyl and foil sound deadening!
- Sound deadening material specifications: nominal thickness 80 mil (2 mm); total coverage area of 18 sqft (1.7 sqm.); number of sheets in the stack 9 folded; nominal sheet size 19.5 x 15 inches (500 x 380 mm). Roller is not included.
- Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. Noico Black 80 mil is 1,5 times better in comparison to sound deadening material of 50 mil. The thicker the material the more performance you get!
- Easy to install4.9
- Value for money4.8
- Noise level4.7
- Adhesion4.7
- Noise cancellation4.7
9
- 1.Moistureproof 2.Superb backed self adhesive 3.Easy to install/handle/cut flexible Perfect for Automobiles, Condos, Apartments, Studios, Classrooms, Factory and more
- Placement of using sound deadener mat:A.Hood B.Celling C.Door D.Cockpit Floor E.Tailgate F.Firwall and U Type Wall J.Front Fender H.Front and Back Wheels
- Wave Sound Deadener Liner has the same characteristics and excellent noise insulator properties as rubber foam. It absolutely doesn’t absorb water & has no odor unlike polyurethane foam. It has a very low weight, oil and petrol resistant.
- Size:About 400mm*1000mm*20mm 15.7″x39.4″ 4.3sqft Raw Material:High Quality foam rubber Function:Soundproof Stick:Best Self-adhesive Type:Car Deadening Material: Insulating fiber &Sound insulation cotton
- The material used is an excellent insulator! The sound deadener material allows you to deal with both, cold and the heat. This is especially important in hot climate areas. Well-insulated interior is a pledge of high comfort while in vehicle. Liner heat shield material will solve the problem of excessive heating if your car is equipped with a powerful engine and enhanced exhaust system. It is also easy to use Liner as the hood insulation (hoodliner).
- Easy to install3.8
- Adhesion3.7
- Noise cancellation3
- Value for money2.6
10
- ★ Siless VIBRO 80 mil is ultimate quality sound deadening insulation. Designed for the automotive industry as an industrial sound damping material for applications that need extreme performance, it is well suited to the demanding car enthusiast as well.
- ★ Value – SILESS VIBRO Damping Material is just under $1.53 per sqft, priced to be cost effective, when compared to similar products on the market. Car soundproofing does not have to be expensive to work!!
- ★ Advanced Formulation – SILESS VIBRO Damping Material consists of newly invented Bmastic, technologically most advanced and efficient sound deadening composition on the market today.
- ★ SILESS VIBRO specs — Thickness 80 mil/ 0.08 inches/ 2mm, Coverage area – 36 ft², Number of Boxes – 1, Number of sheets in box – 14, Each sheet size – 23.6 x 15.94 inches. The installation instructions are included in the package, but a roller isn’t. PLEASE NOTE: Siless Branded logo on the front is optional, some batches could have it and some not.
- ★ Ease of Installation — SILESS VIBRO Damping Material is easy to install with a “peel and place” application. Simply trim the pieces to fit, peel and place and hand roll to ensure good adhesion. No messy spray-on paints or adhesives are needed to install this product.
- Adhesion4.8
- Easy to install4.7
- Value for money4.7
- Sound quality4.6
- Ranking the Brands
- Siless: 30.00%
- Uxcell: 20.00%
- KILMAT: 10.00%
- Guteauto: 10.00%
- LINGDA: 10.00%
- Noico Solutions: 10.00%
- SOOMJ: 10.00%
Comparison Table
| | | | | | | | | | |
| Siless Liner 157 mil (4mm) 36 sqft Car Sound Deadening & Heat Insulation Closed Cell Foam – PE Foam Sound Deadener | uxcell 394mil 10mm 16.36sqft Car Block Heat Sound Absorption Deadener Insulation Mat 60″x40″ | KILMAT 50 mil 50 sqft Car Sound Deadening Mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening | uxcell 236mil 16.36sqft Car Auto Truck Sound Deadener Heat Insulation Underlay Shield Mat 60″x40″ | Siless 80 mil (2mm) 72 sqft Car Sound Deadening mat – Butyl Automotive Sound Deadener – Noise Insulation and Vibration Dampening Material (72 sqft) | Guteauto 236 mil 15 sqft Auto Sound Deadening Material Soundproof Insulation Automotive Sound Deadener Sound Deadening Absorbing Material Car Insulation 55″ x 39″ | LINGDA 21.53 SqFT 10mm Heat Shield Thermal Sound Insulation Proofing Deadener Mat Car Noise Control Acoustic Dampening Moistureproof Waterproof (40″X80″) | Noico Black 80 mil 18 sqft Car Sound Deadening Mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and Dampening | SOOMJ 20mmThick self-adhesive Sound Proof Padding Soundproofing Foam Acoustic Eggcrate Design Car Heatproof Foam Deadener | Siless 80 mil (2mm) 36 sqft Car Sound Deadening mat – Butyl Automotive Sound Deadener – Noise Insulation and Vibration Dampening Material (36 sqft) | |
|---|---|---|---|---|---|---|---|---|---|---|
| Material | Rubber | Aluminum | – | Aluminum | – | Rubber | Paper, Rubber | – | – | Butyl |
| Brand | Siless | Uxcell | KILMAT | Uxcell | Siless | Guteauto | LINGDA | Noico Solutions | SOOMJ | Siless |
| Vehicle Service Type | Passenger Car | Passenger Car | – | Passenger Car | – | Passenger Car | Passenger Car | – | – | Passenger Car |
| Fit Type | Universal Fit | Universal Fit | – | Universal Fit | – | Universal Fit | Universal Fit | – | – | Universal Fit |
| Manufacturer | Bema Group Inc. | uxcell | KILMAT | uxcell | Bema Group Inc. | Guteauto | LINGDA | Noico Solutions | CHINA | Bema Group Inc. |
| Item Weight | 2.6 pounds | 2.05 pounds | 17 pounds | 2.33 pounds | – | 1.3 pounds | 2.05 pounds | 13.2 pounds | 3.52 ounces | 16.45 pounds |
| Package Dimensions | 17.5 x 10 x 7.5 inches | – | – | – | – | 19 x 13 x 2 inches | 20.24 x 20.04 x 4.72 inches | – | 16 x 6 x 6 inches | 17.53 x 10.13 x 4.14 inches |
| Is Discontinued By Manufacturer | No | No | No | No | – | – | No | No | No | No |
| Size | 36 sqft | 40″x60″ | – | 16.36sq.ft | 72 sqft | – | 21.53 SqFT (40″X80″) | – | 15.7″x39.4″ | 36 sqft |
| Position | – | Inner | Inner | Inner | – | Rear | Rear | Inner | – | Front |
| Product Dimensions | – | 19.69 x 14.57 x 3.94 inches | 17 x 3 x 11 inches | 19.69 x 13.39 x 3.15 inches | – | – | – | 16.93 x 11.02 x 2.17 inches | – | – |
Products with 5 star rating
Product5 Stars Votes
269 (3.32%)
3883 (47.89%)
333 (4.11%)
Tips and advices on YouTube
EASILY Sound Treat your Car for Better Sound! – CarAudioFabrication
How To Install Sound Damping in a Car | NVX Audio & Mitsubishi Evo 9
Other interesting articles about “Best Car Sound Dampening Material”
A new platform, revised styling, and more technology bolster the over-the-top luxury of the redesigned Ghost.
A smart thermostat automates heating and cooling to make it more efficient and save you money. You can keep tabs on your home’s climate while you’re away, too.
NASCAR’s three automakers released their Next Gen models for Cup Series competition in 2022, ushering in a new era of the “Rebirth of Stock.”
Leave a Reply