Best Glue For Automotive Abs Plastic
Listen Audio Version of Our Article
Top 9 Best Glue For Automotive Abs Plastic
1
Loctite 681925 Super Glue Plastics Bonding System, Single, Multi
Price: $3.47 – $8.5
Why we chose it
- Quick, neat and easy
- Loctite Epoxy Plastic Bonder does not shrink and is resistant to water, most common solvents and shop fluids.
- Recommended for bonding substrates such as PVC, polycarbonate, acrylic, ABS, FRP, Nylon, Mylar, Delrin, phenolic, aluminum and stainless steel.
- Use for repairing figurines, costume jewelry, cameras, toys, metal car parts, wiper blades, rubber seals and O-rings
- It has high impact resistance and can be sanded and drilled.
- 2 grams
- Repairs any plastic guaranteed
- Carded
- No mixing required
- Easy to apply – no mixing
- When mixed in equal volumes, the components react to produce a tough, rigid, high strength bond in 20 to 25 minutes.
- Bonds leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as Plexiglas, polycarbonate, polystyrene and PVC
- 2-gram tube of bonder with 4mL activator
- Sets in seconds and dries transparent
- Adhesion3.4
- Easy to use3.3
- Value for money2.8
2
Oatey All Purpose Cement Low Voc 8 Oz Clear
Price: $12.9 – $20.26
Why we chose it
- Recommended for potable water, pressure pipe, conduit and DWV
- Meets performance requirements of ASTM D2564, ASTM D2235 and ASTM F493
- Recommended application temperature 40 F to 110 F / 4 C to 43 C
- Always check local codes for acceptability of this product
- Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements
3
Why we chose it
- Kit Includes: (1) 1 Glue Pen (2) Alcohol Prep Pad (1)UV Light With Battery. Please Follow the Instruction on the Backside and Contact Us If Any Question
- Not A Normal Glue,Much Stronger Than Any Other Glue Guaranteed, Fix Other Glue Cannot and You Can Even Build Up Material with It, and That Material is Structually Strong. Magical for Small Parts that Demand Great Strength
- Creates a Permanent Bond In 5-10 Seconds With the Prep Pad Clean The Bonding Face And Cure&Shape Under The UV Light. The UV Curing is Very Fast and Makes Precarious Repairs Possible Without Difficult Clips and Jigs to Hold a Complex Joint While Glue Dires
- Repair Almost Anything: Plastic,Glass,Wood,Metal,Fabric,Stainless Steel, PVC,ABS,Acrylic,Ceramic And More. From the Precious Jewelry to Multiple Craft Projects with the Lowest Cost
- Safe,Non-hazardous Formula,Water Proof and Heat Resistant. Used Advanced Technology, It is also Environmental Safe and Passed the EU 174 Project Testing
- Easy to use3.8
- Value for money3.8
- Adhesion3.4
4
J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe – Black – 25 ml
Price: $5.96 – $15.13
Why we chose it
- STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI
- SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and Aluminum
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy duty epoxy and adhesives repair & restore it right the first time J-B Weld delivers superior performance, quality, and results for the World s Strongest Bond
- J-B WELD PLASTICBONDER (Black): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces J-B Weld PlasticBonder is great for DIY plastic repairs, filling dents, bumper repairs and more J-B Weld PlasticBonder now comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses
- CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure J-B Weld PlasticBonder set and cure color is black
- Easy to use4.5
- Adhesion4.4
- Value for money4.4
- Durability4.4
- Accuracy4.2
5
Permatex 84115 5-minute Plastic Weld Adhesive, 0.84 oz. , Black
Price: $3.99 – $20.79
Why we chose it
- Suggested Applications: Bonds rigid materials including ABS, acrylic, fiberglass, FRP, glass, PVC, SMC, steel, styrene, vinyl, and wood. Use for interior trim, fills cracks, bonds most plastic, bonds plastic to vinyl
- Requires no primers, sets in five minutes at room temperature
- Forms a tough, durable bond to most plastics, composites, ceramics and wood in any combination
- Permanent strength up to 3500 PSI
- Structural adhesive designed for general purpose bonding of a wide variety of materials
- Adhesion4.2
- Easy to use4.1
6
Why we chose it
- NOZZLES INCLUDED: Includes two static mixing nozzles
- VERSATILE ADHESIVE: Bonds virtually any substrate
- HIGH-PERFORMANCE ADHESIVE: Delivers a secure, strong attachment
- URETHANE ADHESIVE: Adhesive won’t become brittle like cyanoacrylates
- GAP-FILLING PROPERTIES: Fix challenging repairs
- FAST-ACTING: Sets in approximately 20 seconds
7
J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty – 2 oz.
Price: $5.77 – $17.81
Why we chose it
- J-B WELD PLASTICWELD: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild various plastic compounds and surfaces. J-B Weld PlasticWeld is designed for DIY plastic repairs on ABS, PVC & CPVC pipes and plastics, auto bumpers and more! PlasticWeld is certified by the NSF and is safe for contact with potable water.
- Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC
- Rebuild automotive trim, fiberglass parts and vinyl siding
- Superior strength
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World s Strongest Bond.
- APPLICATIONS: ABS, PVC & CPVC pipes and plastics, auto bumpers and trim, vinyl surfaces and siding, marine repairs & fiberglass parts, plastic water tanks, and plumbing.
- CURE AND SET TIME: After kneading the two part formula together by hand, PlasticWeld takes 25 minutes to set and cures in 3 hours. J-B Weld PlasticWeld set and cure color is off white.
- PRODUCT FEATURES AND STRENGTH: J-B Weld PlasticWeld has lap shear strength of 600 PSI. PlasticWeld can withstand continuous temperatures up to 250oF (121oC) and intermittent temperatures up to 300oF (148oC) when fully cured. PlasticWeld does not shrink and can be molded, shaped, sanded, drilled and cut.
- Will not shrink or pull away
- Bonds instantly
- Easy to use4
- Value for money3.9
- Adhesion3.8
8
Loctite Epoxy Five Minute Instant Mix 0.47-Fluid Ounce Syringe (1365868)
Price: $3.59 – $17.02
Why we chose it
- Waterproof, sand able and paintable
- Recommended for bonding metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass, concrete and stone.
- It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating.
- High-strength formula bonds wood, metal, tile, ceramic, glass, plastic and more
- The static mix nozzle delivers a uniform mixture of resin and hardener every time.
- It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled.
- Easy-to-use self-mixing dispenser and precision applicator
- Loctite Epoxy Instant Mix 5 Minute does not shrink and is resistant to water and most common solvents.
- Adhesion3.8
- Easy to use3.7
- Value for money3.6
9
J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack – 10 oz.
Price: $14.49 – $29.9
Why we chose it
- J-B WELD ORIGINAL PRO SIZE: Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
- VERSATILE AND DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius. When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
- CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original set and cure color is dark grey.
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World s Strongest Bond.
- SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
- Value for money4.8
- Easy to use4.6
- Easy to spread4.6
- Adhesion4.5
- Heat resistance4.5
J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz.
J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.
- Ranking the Brands
- Loctite: 11.11%
- Oatey: 11.11%
- GUGUYeah: 11.11%
- J-B Weld: 33.33%
- Permatex: 11.11%
- 3M: 11.11%
- Loite: 11.11%
Comparison Table
| | | | | | | | | |
| Loctite 681925 Super Glue Plastics Bonding System, Single, Multi | Oatey All Purpose Cement Low Voc 8 Oz Clear | UV Light Glue Kit Clear Adhesive Liquid Plastic Welder 5 Seconds Repair Almost Anything | J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe – Black – 25 ml | Permatex 84115 5-minute Plastic Weld Adhesive, 0.84 oz. , Black | 3M Super Fast Plastic Repair, 04247, Tranlucent Color, Ready-To-Use, Two-Part Epoxy Finishing Adhesive, 200 mL/6.75 fl oz Cartridge | J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty – 2 oz. | Loctite Epoxy Five Minute Instant Mix 0.47-Fluid Ounce Syringe (1365868) | J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack – 10 oz. | |
|---|---|---|---|---|---|---|---|---|---|
| Compatible Material | Wood, Leather, Paper, Ceramic, Plastic, Metal, Rubber, Fabric | Plastic | Wood, Glass, Plastic, Metal | Fiberglass, Ceramic, Concrete, Plastic, Metal | Wood, Fiberglass, Glass, Ceramic, Plastic, Metal | Plastic | Plastic | Metal, Glass, Ceramic, Wood, Many Rigid Plastics, China, Tile, Fiberglass, Concrete, Stone | Wood, Fiberglass, Ceramic, Concrete, Plastic, Metal |
| Color | Multicolor | Clear | – | Black | Black | – | – | Translucent amber | – |
| Brand | Loctite | Oatey | GUGUYeah | J-B Weld | Permatex | 3M | J-B Weld | Loite | J-B Weld |
| Package Information | Tube | Can | Tube | Syringe | – | Cartridge | Cartridge | Instant mix syringe | Tube |
| Item Volume | 4 Milliliters | 8 Fluid Ounces | 4 Milliliters | 25 Milliliters | 1920 Cubic Inches | 200 Milliliters | 59.14 Milliliters | 14 Milliliters | 147.8 Milliliters |
| Manufacturer | Loctite | Oatey | Pharda | JBWeld | Permatex | 3M | JBWeld | – | JBWeld |
| Item Weight | 0.8 ounces | 12.8 ounces | 0.16 ounces | 4 ounces | 2.4 ounces | 9.6 ounces | 2.4 ounces | – | 3.2 ounces |
| Product Dimensions | 1 x 4 x 7 inches | 3 x 3 x 4 inches | – | 1.57 x 1.18 x 7.28 inches | 1.13 x 3.81 x 8 inches | 12 x 9.63 x 9.63 inches | 7.5 x 3.8 x 1.19 inches | – | 1.77 x 6.5 x 8.46 inches |
| Is Discontinued By Manufacturer | No | – | No | No | No | No | No | – | No |
| Size | Single | 8 oz | 1 Pack | – | – | – | – | – | – |
Products with 5 star rating
Product5 Stars Votes
6144 (19.63%)
Tips and advices on YouTube
How to Bond ABS Plastic Together | How to Repair ABS Plastic Easy | Automotive Repair Techniques
Top 5 Best Glue For Plastics Review in 2021[Epic Deals]
Best Glue for Plastic Auto Parts – Grill Cover Repair | 1-2-Fixed with Tech-Bond
Other interesting articles about “Best Glue For Automotive Abs Plastic”
The best running boards are made of aluminum or steel with a non-slip surface for traction. The best running boards help improve safety.
Consumers can expect higher prices on everything from homes to smart devices and medical supplies, the Wall Street Journal reported.
We all need screwdrivers, but we don’t all need the same ones. This helpful explainer walks you through the best screwdrivers for apartment dwellers, people with kids, people with IKEA furniture, and people with glasses.
Leave a Reply