Best Brake Line Bender: image
Editor's Pick

Just one tool works on three sizes of tubing: 1/4″, 5/16″ and 3/8″. The tool is sold in the US and can be used to make 180-degree bends in copper, brass, aluminum, and steel tubing. It has a built-in safety lock that prevents accidental falls. Notably, this comes after a customer complained about the quality of the product.

Best Value

Bending radius of 180 degrees, the Quick-action indexing lever is repositioned two-stages midway through the bend. The handle can be used to create 90-degree bends with reduced effort and No Crossing of Handles. It has been designed to provide maximum comfort for the user while working in tight spaces. This feature was first introduced in 2015 by Dr Arun Jain.

Honorable Mention

ABN Brake Line Bender, which is made from precision-machined aluminum alloy, allows for easy bending of tubing up to 180 degrees. The tool has a built-in pressure relief valve that prevents the tube from leaking. It can also be used to bend metal pipes and fitting them into grooves. Notably, the product is manufactured in India. The tool’s use is restricted to US states.

Best Brake Line Bender

Listen Audio Version of Our Article

Top 10 Best Brake Line Bender

1
Why we chose it
  • Built to Last Brake tubing bender made from precision-machined aluminum alloy for extra strength and durability Brake line bender tool includes a comfort grip to ease tension while working
  • Hand Held Tube Bender Use the ABN Sheet Metal Line Bender Tool Brake Tube Bender to quickly and smoothly bend copper, brass, aluminum, and steel thin-walled tubing without flattening or damaging your metal
  • Clear Identification Angles and bends etch marked on the brake line tubing bender will provide simple and clear identification for easy use on every project There will be no guesswork when it comes to working with these brake line tube bender
  • Easy to Use Brake tubing pliers allows for 180-degree and or 90-degree bends Line up the metal tube or pipe into the brake forming pliers and use the handle marked O R L to curve along the metal to the desired angle Allow the pipe bender pliers to do the work for you
  • 3 Channel Design This fuel line tube bender include 3 channels for work on 3 common tubing sizes Bend 1/4-inch (6mm),5/16-inch (8mm),or 3/8-inch (10mm) tubing
Abn Brake Line Bender - 180 Degree Handheld Tubing Bender for 1/4in, 5/16in, and 3/8in Brake Line Bending Tool: image
84%
customers recommend this product
4.2/ 5
2
Why we chose it
  • Handle grips provide firm hold and comfort.
  • For use aligning, bending, and adjusting brake and fuel lines, fitting new hard lines, and changing the bend of existing lines.
  • Brass 3/16″, 1/4″ lines Brake Line Forming Bending Tool Pliers. For use on 3/16″ and 1/4″ brake, AC, and fuel lines.
  • Constructed from heavy duty forged steel for strength and durability.
  • Easily bends tube without damaging or distorting tubing.
Abn Brass 3/16in, 1/4in lin Brake Line Forming Bending Tool Pliers: image
86%
customers recommend this product
4.3/ 5
3
Why we chose it
  • 9″ long forged steel with vinyl gripping handles
  • Align, bend and adjust 3/16″ and 1/4″ brake and fuel lines with a twist of the wrist
  • Shaped jaws bend tubing without distortion
Gino Development 02-0202 TruePower Brake Line Forming Tool with Pliers and Bender: image
86%
customers recommend this product
4.3/ 5
4
Why we chose it
  • Quick-action indexing lever repositions two-stage handle midway through Bend. This feature allows easy fabrication of bends up to 180 with reduced effort, better control and No Crossing of handles
  • Compact design for working in tight spaces. Cushion grips for comfort and stability
  • Optimum bending radius for each tubing Size
Imperial Tool 470FH Triple Head 180 Degree Tube Bender, 3/16", 1/4", 5/16" and 3/8": image
90%
customers recommend this product
4.5/ 5
Top Pick
5

OTC 6515 3-in-1 180 Degree Heavy Duty Tubing Bender

374 ratings | 1 offers | 374 Reviews
Price starts from: $1
Why we chose it
  • Just one tool works on three sizes of tubing 1/4″ 5/16″ and 3/8″
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
  • Capable of making 180 degree bends in copper brass aluminum and steel tubing
OTC 6515 3-in-1 180 Degree Heavy Duty Tubing Bender: image
90%
customers recommend this product
4.5/ 5
6

Lisle 44150 3/16″ Tubing Bender Pliers

179 ratings | 4 offers | 179 Reviews
Price: $26.76$43.29
Why we chose it
  • The handles are more than 3-1/4 inches apart for proper leverage when handling even steel tubing
  • Unique head design bends tubing without collapsing the tube
  • Package dimension is 5.75 inches width by 10.5 inches height by 0.75 inches depth
  • Bends 3/16 inch brake lines without kinking or flattening, especially in tight spots
Lisle 44150 3/16" Tubing Bender Pliers: image
90%
customers recommend this product
4.5/ 5
7
Why we chose it
  • 3-in-1 Capacity Three sizes of tubing 1/4″, 5/16″ and 3/8″. Color: Blue.
  • User Manual You can manipulate and work it easily and simply with user manual. We have confidence in the quality of our tubing bender. Any question, please just contact us and we will make things right!
  • Crafted and sturdy tool High visibility markings 180 design. Avoid denting and collapsing your tubes. Quality machined aluminum alloy for strength and durability.
  • Ergonomic and Knurled Design Ergonomic wide hook grips equipped with non-slip, long knurled grip handles allow you to deliver the optimal and comfortable working experience.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Wostore 180 Degree Tubing Bender for 1/4 5/16 and 3/8Inch Copper Aluminum Thin Stainless Steel Blue: image
86%
customers recommend this product
4.3/ 5
8
Why we chose it
  • 4.Adds NEW FUNCTION of reshaping deformed 1/2 and 3/4 copper crimp rings by itself.
  • 5.2 in 1 PEX PIPE Tool used to fasten PEX Copper Crimp Rings in 1/2 inches and 3/4 inches.
  • 1.Meets ASTM F1807 Standard and comes with Go/No Go gauge.
  • 3.Polished Jaws ensure no damage of cooper rings and get a perfect crimp connection.
  • 2.Ergonomical handle design with comfort grips minimizes user fatigue.
IWISS® IWS-1234P Pex Pipe Crimping Tool for Crimp Jaw 1/2" & 3/4" Suit Sharkbite, Watts, Apollo and All US F1807 Standards: image
88%
customers recommend this product
4.4/ 5
9
Why we chose it
  • 1234W Combo Angle Head Pex Pipe Plumbing Crimping Tool IWISS for Copper Crimp Jaw Sets 1/2 & 3/4 with Go/No-Go Crimp Gauge
1234W Combo Angle Head Pex Pipe Plumbing Crimping Tool IWISS for Copper Crimp Jaw Sets 1/2 & 3/4 with Go/No-Go Crimp Gauge by Iwiss: image
94%
customers recommend this product
4.7/ 5
10

Ion Tool 3-in-1 Tubing Bender

0 ratings | 1 offers | 0 Reviews
Price starts from: $1
Why we chose it
  • Comes with anti-slip handles and easy to read gauge
  • Bends copper, brass, aluminum, and thin wall steel tubing between 0-180 degree
  • All-in-one tool has three channels for 1/4″ (6mm),5/16″ (8mm),3/8″ (10mm) tubing
  • Satisfaction guaranteed
  • Quality machined aluminum alloy for strength and durability
Ion Tool 3-in-1 Tubing Bender: image
50%
customers recommend this product
3/ 5
Ranking the Brands
Abn: 20.00%
Gino Development: 10.00%
Imperial Tool: 10.00%
OTC: 10.00%
Lisle: 10.00%
Wostore: 10.00%
Yueqing Iwiss Electric Co., Ltd: 20.00%
Ion Tool: 10.00%

Comparison Table

Сomparison: Abn Brake Line Bender - 180 Degree Handheld Tubing Bender for 1/4in, 5/16in, and 3/8in Brake Line Bending Tool: imageСomparison: Abn Brass 3/16in, 1/4in lin Brake Line Forming Bending Tool Pliers: imageСomparison: Gino Development 02-0202 TruePower Brake Line Forming Tool with Pliers and Bender: imageСomparison: Imperial Tool 470FH Triple Head 180 Degree Tube Bender, 3/16", 1/4", 5/16" and 3/8": imageСomparison: OTC 6515 3-in-1 180 Degree Heavy Duty Tubing Bender: imageСomparison: Lisle 44150 3/16" Tubing Bender Pliers: imageСomparison: Wostore 180 Degree Tubing Bender for 1/4 5/16 and 3/8Inch Copper Aluminum Thin Stainless Steel Blue: imageСomparison: IWISS® IWS-1234P Pex Pipe Crimping Tool for Crimp Jaw 1/2" & 3/4" Suit Sharkbite, Watts, Apollo and All US F1807 Standards: imageСomparison: 1234W Combo Angle Head Pex Pipe Plumbing Crimping Tool IWISS for Copper Crimp Jaw Sets 1/2 & 3/4 with Go/No-Go Crimp Gauge by Iwiss: imageСomparison: Ion Tool 3-in-1 Tubing Bender: image
Abn Brake Line Bender – 180 Degree Handheld Tubing Bender for 1/4in, 5/16in, and 3/8in Brake Line Bending ToolAbn Brass 3/16in, 1/4in lin Brake Line Forming Bending Tool PliersGino Development 02-0202 TruePower Brake Line Forming Tool with Pliers and BenderImperial Tool 470FH Triple Head 180 Degree Tube Bender, 3/16″, 1/4″, 5/16″ and 3/8″OTC 6515 3-in-1 180 Degree Heavy Duty Tubing BenderLisle 44150 3/16″ Tubing Bender PliersWostore 180 Degree Tubing Bender for 1/4 5/16 and 3/8Inch Copper Aluminum Thin Stainless Steel BlueIWISS® IWS-1234P Pex Pipe Crimping Tool for Crimp Jaw 1/2″ & 3/4″ Suit Sharkbite, Watts, Apollo and All US F1807 Standards1234W Combo Angle Head Pex Pipe Plumbing Crimping Tool IWISS for Copper Crimp Jaw Sets 1/2 & 3/4 with Go/No-Go Crimp Gauge by IwissIon Tool 3-in-1 Tubing Bender
ManufacturerABNABNTruePowerImperial ToolOTCLisleWostoreYueqing Iwiss Electric Co., LtdYueqing Iwiss Electric Co., LtdIon Tool
BrandAbnAbnGino DevelopmentOTCLisleIon Tool
Product Dimensions7.62 x 6.99 x 27.94 cm; 231.33 Grams10.16 x 2.54 x 30.48 cm; 430.91 Grams6 x 9 x 28 cm; 600 Grams27.05 x 7.49 x 6.73 cm; 1 Grams30.48 x 15.24 x 1.91 cm; 226.8 Grams
Item Weight231 g431 g408 g600 g1 g227 g454 g1.62 kg1.02 kg454 g
MaterialMetalAlloy SteelStainless SteelAluminum, Plastic, Copper
Package Dimensions31.5 x 10.16 x 1.52 cm; 408.23 Grams27.43 x 7.11 x 6.86 cm; 454 Grams40.28 x 13.21 x 3.91 cm; 1.62 Kilograms29.72 x 11.43 x 3.3 cm; 1.02 Kilograms27.18 x 7.11 x 5.33 cm; 454 Grams
Batteries included?NoNoNoNo
Batteries Required?NoNoNoNo

Products with 5 star rating

Tips and advices on YouTube

How To Bend and Flare Brake Lines -EricTheCarGuy
How To Bend Brake Line With Out A Tubing Bender

Other interesting articles about “Best Brake Line Bender”

Take a sensible saloon, give it a powerful engine, retune the dynamics and you’re onto a winner – but which super saloons dominate our top ten?
Volkswagen T-Cross (2022) in-depth review. Read our experts’ views on the engine, practicality, running costs, overall performance and more.

Leave a Reply

Your email address will not be published. Required fields are marked *